Author Topic: Figure Print Process [Arcanaville]  (Read 62106 times)

Plextorette

  • Underling
  • *
  • Posts: 1
Re: Figure Print Process [Arcanaville]
« Reply #100 on: January 17, 2018, 02:03:55 PM »
I know this thread is a bit old, but thanks for all the work that went into it. I am finally printing my character with my FlashForge Creator Pro! Had to learn a bit of Blender and what I could not figure out was fixed with Microsoft 3D Builder (Simplify 3D was not able to create supports without fixing in 3D Builder).

- Plex

Update: I've since learned there are a lot of steps needed to make the character printable (I was only able to initially print the legs). Sculpteo has a great set of tutorials to help you make your character printable at https://www.sculpteo.com/en/tutorial/
« Last Edit: February 04, 2018, 01:43:33 PM by Plextorette »

Matt Bold

  • Lieutenant
  • ***
  • Posts: 51
Re: Figure Print Process [Arcanaville]
« Reply #101 on: November 21, 2018, 04:04:48 AM »
Sorry for necroing this thread.  Anyone ever run into an issue with 0 byte ogle.obj files?

Velluminous

  • Underling
  • *
  • Posts: 2
Re: Figure Print Process [Arcanaville]
« Reply #102 on: March 07, 2019, 07:50:29 PM »
Sorry for necroing this thread.  Anyone ever run into an issue with 0 byte ogle.obj files?

Sorry to Necro-post, but this 0 byte ogle.obj files is the exact problem that I've been running into.   I've been trying this with different configurations all day with no success.

Icon crashes whenever I uncomment the ExtensionOverride (see below)
//      ExtensionOverride = ("GLExtOverride/GLExtOverride.dll")
//      {
//    RemoveExtensions = (GL_ARB_vertex_program, GL_ARB_fragment_program);
//      }

Could someone who has gotten this to work successfully maybe upload their gliConfig.ini ?

Mister Hassenpheffer

  • Boss
  • ****
  • Posts: 126
    • 3D printouts?!
Re: Figure Print Process [Arcanaville]
« Reply #103 on: March 08, 2019, 08:23:39 PM »
Capture does NOT play well with Nvidea cards. 

Shadowplay breaks OGLE capture.

Switch to onboard video if its an option.

A cheapo laptop could also be a viable solution as long as the graphics chipset is NOT Nvidea.

DrBoston

  • Lieutenant
  • ***
  • Posts: 88
Re: Figure Print Process [Arcanaville]
« Reply #104 on: June 02, 2019, 12:27:03 AM »